Flow Instruments

Electromagnetic type Flow Meter


img
  • Application: Water/waste water, chemical, food,
and pharma etc. Conductivity >5microSVersion compact/remote/hygienic Line size DN10-DN3000
  • Liner: Hard Rubber/PTFE/PFA(fully flared with flanges) Electrode material: SS, Hastelloy C, Platinum&Iridium. Velocity : 0.01m/s to 20m/s
Accuracy : +/-0.4% (or)+/-9m/s
  • Op Press : 40 Bar,OpTemp:60deg C/135deg C/150deg C Output and communication :4-20 mA, Pulse/HART/FF/Profibus/ RS485/GPRS/GSM

  • Housing :Flow Tube is completely welded (SS3014/SS316/Die cast Alluminium)
  • Protection : IP 65/67/68
3-line display with Back-lit and password protection
  • Display Parameter (flow rate, Totalizer, Velocity
%of flow, mV, empty pipe alarm etc..)
% of flow, mV, empty pipe alarm, etc...) Power supply 370 V AC/24 VDC/Battery Operated


Vortex flow meter


img
  • Application : water, chemical, air, gas, steam, etc.
  • Version : Compact/Remote/Insertion.
  • Line size : DN10 to DN500
  • Electrode Material : SS316L,Hastalloy,Platinum and Iridium
  • Accuracy : +/- 0.4%, Calibrated as +/- 0.2%
  • Op Press : 25 Bar, Op temp : 450 deg C
Output & communication :4-20mA Pulse,
2 wire/3 wire /485/HART/FF/Profibus Exproof by default
Extended rod – to protect electronics.
  • Display 4 line with push button.
  • Power supply : 12-24 V DC/2 wire/3 wire/battery operated Temperature /Pressure compensation as optional.

Ultrasonic Clamp-on Flow meter


img
  • Application : Water, waste , chemical, etc. for larger diameter, no need to cut the pipe

  • Line size : DN 15 to DN 6000
Type : clamp on/insertion
  • Mounting : Wall/Panel mount/Portable Op Temp : 70 deg C/90deg C/160 deg C Display : 2- line LCD with Back lit Protection : IP 65/67/68
  • Approval: APTEX /FM/XP etc. Pipe material: CS/SS/PVC/Cast Iron/Brass/Aluminum etc. Output &communication : 4-20 mA Frequency /RS 485/232 Accuracy : +1%
Power supply : AC/DC/Battery operated.

Ultrasonic Inline Flow meter


img
  • Application : water , waste water, chemical etc.
  • Line size : DN 15/ DN 1000.
  • MOC : SS/CS Op Press : 16 Bar,
  • Op temp : -40 deg C to 160 deg C
Accuracy : + 1% /+ 2%Built-in Data logger ,2 – line LCD display Power supply : AC/DC/Battery operated

Coriolis Mass Flow meter


img
  • Application: Liquids, Slurries, Solids, etc.
  • Line Size : DN 6 to DN 150.
  • Sensor Material : 1Cr.18Ni9Ti/SS316L.
  • Op: Press : 40 Bar, Op-temp : 200 deg C
  • Output :- 4-20 mA, pulse 0-10 kHz/RS-485, Communication: HART
  • Display : Current flow and Totalizer Temperature, Density and so on
  • Version : Compact / Remote Power Supply : 24 VDC/ 250 VAC

Thermal Mass Flow meter


img
  • Application : Bio gas, steel, petroleum
  • Line size : DN 25-DN2000
  • Type : Inline/Insertion Inline : DN25-DN2000
  • Insertion : DN 40-DN 2000 Op pressure : 25 bar ,Op temp : 120 deg C
  • Output &communication : 4-20 mA/RS 485/HART
  • Protection : IP 65/IP 68 Accuracy : +/- 0.4% to +/- 1%

Turbine Flow meter


img
  • Application: water, waste water, petrol, chemical, metallurgy, gas, etc.
  • Bio Direction flow measurement.
  • Line Size : DN 4 to DN 200
  • MOC Aluminum Alloy for DC supply and SS304 for battery operated.
  • Op Pressure :25 bar flange type & 63 bar Op temperature : 20 deg C to 120 deg C
  • Power supply : 5-24 VDC/Battery Operated (3.4V) Output :- 4-20 mA, Pulse 2- wire Accuracy +/- 1%

Muti-Jet/AMR meter


img
  • Flow rate : 15 mm: Min: 30L/h-Max: 3 m3/hr 20 mm: Min: 50L/h-Max: 5 m3/hr 25 mm: Min: 70L/H- Max: 7m3/hr
  • Protection: IP 68
  • Pressure rating :10 bar
  • Operating Temperature b: 50 deg C
  • Internal mechanism : Dry type Accuracy : +/- 3%at max flow , +/- 5 % at min flow
  • Marking : CE marking